Mold can be a menace if left unchecked in the home, affecting furniture, clothing, beddings and even causing damage to the walls and roof. Several factors can support the development of mold in your home, chiefly being moisture. To prevent the growth or spread of mold in your home, you need to take proactive measures such as regular cleaning or the use of herbicides if the situation is severe. The technicians at SERVPRO of Southwest Las Vegas say they’re trained to pay high attention to detail and can help you finding if there is any problem.
Here are a few tips you may want to consider when looking for the best ways to stop mold growth in your home.
Control the moisture level in the house
As discussed before, mold thrives when there is a lot of moisture in the house. Mold growth is a major problem for people living in humid regions. It is in your best interest to effectively regulate the humidity levels in the house. One of the first steps is ensuring you properly ventilate your home, turn on the vent fans when using the kitchen and bathroom or any section of the house with water. Another measure you can take is installing whole-house dehumidifiers. These will help get rid of excess moisture in the house.
You can also use your air conditioning system to regulate the level of moisture in the air and improve air circulation in the house. Without proper ventilation, the house provides a warm, moist, and dark atmosphere, a good recipe for mold growth.
Adopt new green cleaning solutions
Some of the cleaning products are known to produce overwhelming odors, which are sources of Volatile Organic Compounds in the house. When using such cleaning solutions to get rid of mold and other allergens, you may be removing one contaminant only to replace it with another. To get rid of mold, it is advisable to use water-based, non-toxic, and non-aerosol. When getting a cleaning solution for your mold infestation, it doesn’t hurt to get a second opinion from a professional. This way, you can make an informed decision on the best cleaning products to use. If you’re dealing with insect issues as well, there are pesticides with mold control available as well to knock out both issues at once.
Identify problem areas and fix them
It is difficult to fight mold growth completely, but there are proactive ways of preventing future growth. The best way to go about this is to do a full house inspection of the house to identify key areas where mold can grow. Look out for moist conditions; an example is leaking pipes or condensed air on the roof or damage to the ceiling from a previous leak.
To fix this problem, you may have to fix all the damaged pipes, get rid of damp carpets and even replace the damaged ceiling. Use mold-resistant products in areas that need a total overhaul. It may cost you a lot now when waterproofing or repairing mold-affected sections, but it’s definitely worth it.
Dry wet areas immediately
Without moisture, mold cannot grow. Handle all the wet areas immediately and you notice them. In case run-off water seeps into your house after a heavy downpour, don’t wait to remove it later. Take care of it immediately after the rain subsides. Spills on carpets or pipe leaks on the floor surface or in the wall should be dried off immediately when spotted. This rule does not apply only to the once-in-a-while wet occurrences; it also works for the daily occurrences in the home. Don’t leave wet clothes in the laundry basket or washing machine or wet items lying all over. Clean them up immediately to prevent the growth and spread of mold.
Improve air flow in the home
Aside from improving the air quality you breathe in, this is a good way of fighting mold growth in your home. Without proper airflow, water may begin to condense on the walls, window, and even on furniture. To improve airflow, open up the windows and the doors between rooms, move the furniture away from the walls and even bring in a houseplant.